Flowline_logo

Phone: 888-206-4108
Email: sales@levelandflowonlinesales.com
Fax: 636.537.1405

Level and Flow navigation Level and Flow Online Sales home New Flowline products Level and Flow Online Sales store Flowline part numbers Contact Level and Flow Online Sales Level and Flow Online Sales Extra Links Level and Flow Online Sales home Level and Flow Online Sales store Contact Level and Flow Online Sales Level and Flow Online Sales home Level and Flow Online Sales store

Thermo-Flo

Thermo-Flo™ Liquid and Gas Flow Switch

-FT10 Data Sheet-
-FT10 Manual-
-GT10 Data Sheet-
-GT10 Manual-

BUY NOW

FT10
GT10

 

Thermo-Flo™ flow switches are generally selected for low or no-flow applications. Each is available with either a short or a long sensor, and the switch set point is adjustable, allowing customization for any situation. The 1A relay provides a reliable switch interface with remote devices such as a PLC, SCADA or alarm.

The gas configuration (GT10) is great for relatively clean gases with non-coating characteristics (nitrogen or rubber exhaust fumes). The liquid configuration (FT10) is ideal for relatively clean water and chemical solutions with non-coating or crystallizign characteristics (deionized water or sulferic acid).

 

-Specifications-

THERMO-FLO LIQUID (FT10) THERMO-FLO GAS (GT10)
Set point range: .04 to 3 fps (.012 to .91 mps) Set point range: 1 to 90 fps (.3 to 27 mps)
Factory set point: .2 fps (.06 mps) Factory set point: 10 fps (3 mps)
Repeatability: ±.5% of set point @ fixed temp. Repeatability: ±.5% of set point @ fixed temp.
Response time: 1-10 seconds Response time: 1-10 seconds
Set point adjust: Potentiometer Set point adjust: Potentiometer
Viscosity range: 1-200 centipoise    
Supply voltage: 12-36 VDC Supply voltage: 12-36 VDC
Consumption: 70 mA maximum Consumption: 70 mA maximum
Contact type: (1) SPST relay Contact type: (1) SPST relay
Contact rating: 60 VA Contact rating: 60 VA
Contact output: Selectable NO/NC Contact output: Selectable NO/ NC
Process temp: F: 32° to 140°
C: 0° to 60°
Process temp: F: 32° to 140°
C: 0° to 60°
Electronics temp: F: -40° to 140°
C: -40° to 60°
Electronics temp: F: -40° to 140°
C: -40° to 60°
Pressure: 150psi (10 bar) @ 25°C, derated @ 1.667psi (.113 bar) per °C above 25° C Pressure: 150psi (10 bar) @ 25°C, derated @ 1.667psi (.113 bar) per °C above 25° C
Sensor rating: NEMA 4X (IP65) Sensor rating: NEMA 4X (IP65)
Sensor material: 1__5: PP-Ryton
5__5: PVDF Kynar
Sensor material: 1__5: PP-Ryton
5__5: PVDF Kynar
Cable jacket material: 1__5: PP
5__5: PFA Teflon
Cable jacket material: 1__5: PP
5__5: PFA Teflon
Cable type: 4-conductor, #22 AWG (shielded) Cable type: 4-conductor, #22 AWG
(shielded)
Cable length: Standard: 10' (3m)
Special order: 25' (7.6m) or 50' (15.2m)
Cable length: Standard: 10' (3m)
Special order: 25' (7.6m) or 50' (15.2m)
Process mount: 3/4" NPT (3/4" G / Rp) Process mount: 3/4" NPT (3/4" G / Rp)
Mount gasket: Viton Mount gasket: Viton
Classification: General purpose Classification: General purpose
CE compliance: EN 50082-2 immunity
EN 55011 emission
EN 61010-1 safety
CE compliance: EN 50082-2 immunity
EN 55011 emission
EN 61010-1 safety

 

Call toll-free: 888.206.4108--- Email: sales@levelandflowonlinesales.com --- Fax: 636.537.1405