Flowline_logo

Phone: 888-206-4108
Email: sales@levelandflowonlinesales.com
Fax: 636.537.1405

Level and Flow navigation Level and Flow Online Sales home New Flowline products Level and Flow Online Sales store Flowline part numbers Contact Level and Flow Online Sales Level and Flow Online Sales Extra Links Level and Flow Online Sales home Level and Flow Online Sales store Contact Level and Flow Online Sales Level and Flow Online Sales home Level and Flow Online Sales store

Switch-Tek Vibration Level Switch

Switch-Tek™ Vibration Level Switch

-Data Sheet-
-Manual-

BUY NOW

LZ12

 

The Switch-Tek™ vibration level switch is a great choice for dirty liquids including those with light to medium coating, scaling or foaming characteristics. Media examples include wastewater, diluted caustic soda and light weight oil. For optimum performance and proactive maintenance, the sensor automatically adjusts for coating build up, and if necessary, outputs a preventative maintenance alarm. The 1A relay provides a reliable switch interface with remote devices such as a PLC, SCADA or alarm. The submersible sensor is universally mounted through the wall or inside the tank.

Using advanced self-learning technology, this switch automatically adjusts to increased material build-up on the forks for maximum coating performance. If the coating becomes too significant, then the sensor will actuate a transistor alarm for proactive maintenance.

 

-Specifications-

Orientation: Universal Sensor rating: NEMA 6 (IP68)
Accuracy: ± 1 mm in water Sensor material: Ryton (glass filled), Viton cable grommet
Repeatability: ± 0.5 mm in water Cable jacket material: Polypropylene
Supply voltage: 12-30 VDC Cable type: 5-conductor, #24 AWG (shielded)
Consumption: 25 mA maximum Cable length: Standard: 10' (3m)
Special order: 25' (7.6m) or 50' (15.2m)
Contact type: (1) SPST relay
Contact rating: 60 VA

Process mount:

3/4" NPT (3/4" G)
Contact output: Selectable NO/NC Mount gasket: Viton
Maintenance alarm: NPN transistor, 10 mA max. Classification: General purpose
Process temp: F: -40° to 176°
C: -40° to 80°
CE compliance:
(pending)
EN 61326 EMC
EN 61010-1 safety
Pressure: 150 psi (10 bar) @ 25°C, derated @ 1.667 psi (0.113 bar) per °C above 25°C    
     
     

Call toll-free: 888.206.4108--- Email: sales@levelandflowonlinesales.com --- Fax: 636.537.1405